Sharing Is Caring:

Siemens Unigraphics NX Electrical Routing/Wiring and Harness

Basics of Electrical Routing/Wiring and Harness

Free tutorial

Created by Tech Design


What you’ll learn

  • Complete Electrical routing
  • Basics of qualify parts
  • Qualify Simple Clips
  • Orient Branch
  • Formboards
  • Electrical Component Navigator
  • Importing and Exporting a Connection List


  • Basics of UGNX
  • MY UG NX crash course
  • Basics of sketch


The NX electrical routing course is designed to teach you the basics of electrical routing as it applies to the design of wiring and harness connectors you will cover the basic electrical routing terminologies electrical design process parts parts terminals and stocks upon completing of this course you will be ready to start designing your own wiring harness projects

A wire harness is a group of wires and cables that can be bundled together and are routed in various configurations to transfer electricity/information to and from various switches and devices. The designer builds a master part file for a family of harnesses. By using a master part file, all of the lengths are determined with allowances for movement and interferences. The master part file also keeps the proliferation of harnesses to a minimum. The wire harness is usually one of the last components to design because all the component location information must be compiled, established and assembled before you can define the scope of the harness. You need to know which connectors are used for each application and other components. You need to have knowledge of the movement or location of other non-electrical components to which you have to route wires through or around. Attachment points for securing the harness must also receive special consideration. Spacing clips or clamps too far apart can cause a rattle condition. Gravity also plays a part in securing the harness. Safety is the most important requirement. You can start to see why you need to gather all the information of the configuration before starting your design of the wire harness.

Read Also -->   Recon For Penetration Testers

In this course you will be going to learn how electrical routing behaves when it is activated in unigraphics NX application

you are going to learn how to qualify your parts how to qualify clips and much other things

To understand this course you must have a knowledge on any graphics application please check my unigraphics NX basic crash course and complete that to understand this better

In this course you are going to learn how to create a form boards How to create a fixture pot how to keep create fitting port and how to move place.

Important connections and exporting connections for Electrical routing workbench

Different projects on electrical routing flying shape type project creating a linear paath paath operation overview stock of set point subdivide segment transform path connect path delete routing objects assign corner these are the few commands that we are going to learn in our electrical and wiring harness workbench

Who this course is for:

  • Designers, Electrical Engineers, Mechanical Engineers

Show less

Course content

3 sections • 6 lectures • 31m total lengthCollapse all sections

Introduction1 lecture • 7min

  • Electrical Routing/Wiring and Harness || Basics || Routing Terminologies06:32

Qualify Parts4 lectures • 20min

  • Qualifying Parts/Connectors05:23
  • Qualify Fitting Port05:41
  • Qualify Fixture Port02:48
  • Qualify Multi Port05:56

Practice Example1 lecture • 5min

  • Qualify Simple Clip Project05:02

👇👇👇👇 Click Below to Enroll in Free Udemy Course 👇👇👇👇

Go to Course

👇👇 See Also 👇👇

Join Us Join Us Join Us
Sharing Is Caring:

Leave a Comment

Ads Blocker Image Powered by Code Help Pro

Ads Blocker Detected!!!

We have detected that you are using extensions to block ads. Please support us by disabling these ads blocker.

Powered By
100% Free SEO Tools - Tool Kits PRO